STUDIO 1 XLR-BP Adapter. Belt Clip. 2 XLR Inputs Right Angled 1/8" /3.5mm output

Description

The XLR-BP adapter, designed for those working with cabled microphones & wireless microphone systems, like dynamic microphones, battery power mics, shotgun microphones or lavalier mics.  The XLR-BP will work with all camcorders that have a 1/8" microphone input jack.
The XLR-BP doesn’t connect to an audio mixer; it’s just for connecting to XLR mics and/or XLR wireless mic system
s.
The XLR-BP has two 1/8" mini jack, stereo-mono input switch, dual audio level controls, and is lightweight.
The XLR case is shielded against both EMI & RFI interference. It provides shielding that meets military specs. The XLR adapter case shields the entire circuit inside. In addition, each custom transformer is also wrapped multiple times with EMI & RFI shielding material for superior shielding.
The XLR-BP audio adapter clips onto a belt with a 4 ft cable with a stereo mini plug so it can plug into your camera's mic jack. And you can use the belt clip to clip it on a camera strap.
Dual Inputs
- There are two XLR inputs and two1/8" mono inputs.
Record any combination of the two inputs onto separate audio tracks (using the stereo right and left audio tracks).
Stereo/Mono Output Switch.
This allows you to use only one microphone and have it record to both the right and left audio tracks. Also, when the switch is in the mono position and there are two inputs present, it will mix the two inputs together and send the mixed output to both the right and left audio tracks.
Locking XLR Connectors
- This prevents the XLR cables from pulling out of the XLR audio adapter
Independent Audio Level Controls
- We used high grade audio level pots to allow you to control the input audio levels.
Voltage Blocking Circuit
to handle the "Plug-In Power" Mic Jacks found on Sony video cameras.
The XLR-BP is a passive device
. No power required.
The XLR adapter works with all video cameras that have a 1/8" mic jack.