Deity Location Sound Package 2

Description

What's in the Box
Deity Microphones S-Mic 2 (with included accessories)
Audio Technica AT8314-30 30' Premium Microphone Cable
K-Tek KE-89CC Avalon Series Aluminum Boompole with Internal XLR Cable
Deity Location Sound Package 2
Deity Location Sound Package with Deity SMIC2 Cinema Series S-Mic and K-Tek KE89CC Boompole
This great package offers everything you need to capture great location audio!
With the
Deity Microphones S-Mic 2
moisture-resistant shotgun microphone, boom operators and sound recordists can achieve broadcast-quality sound in a variety of outdoor shooting scenarios such as indie films, news gathering, documentaries, and weddings.
Professional-level features such as low-noise circuitry and anti-RF interference construction minimize the need for noise reduction after recording. Thanks to the high sensitivity of the S-Mic 2, robust output levels are possible without having to max out your preamp's gain control. Tonally, the S-Mic 2 offers a smooth, warm sonic signature with low off-axis coloration and natural attenuation of bass frequencies below 50 Hz.
You'll find no switches, buttons, or dials on the S-Mic 2, so you always depend on it to deliver consistent sound, reliability, and ease of use. The lightweight solid brass housing ensures toughness gig after gig, and its black speckle paint provides low reflectivity and added durability.
Audio-Technica is a leading manufacturer of audio cables, and their
AT8314-30 (30')
is a professional, premium-grade microphone cable perfect for all types of applications. The 2-conductor, shielded, broadcast-type cable can also be used to extend the length of an existing XLR connection. Look no further than the Audio-Technica XLR Male to XLR Female Balanced Cable for your professional audio cabling needs. Balanced XLR Connectors (M/F) At each end, XLR connectors either have three pins (M) or sockets (F) within a locking metal shell. They are commonly used in professional audio applications to connect microphones, mixers, recording equipment and other gear.
On typical XLR components, pin 1 is the +signal line, pin 2 is the -signal line and pin 3 is the ground/shield. This pin combination facilitates top-quality, low-noise, balanced audio, even across long-distance cable runs. Phantom Power XLR cables are also capable of carrying DC "phantom power" to microphones on both the plus and minus signal lines. Shotgun and lavaliere microphones typically use phantom power or must use on-board batteries. Shielded Ground The 3rd pin is connected to a copper-wound shield. Wrapped around the other two wires, this shield provides both an interference-blocking barrier and a grounded connection.
This kit would not be complete without the
K-Tek KE-89CC Avalon Series Aluminum Boompole
. It provides a lightweight boompole solution for ENG, EFP and other field recording applications. Its sturdy aluminum design is tough enough to endure the rigors of road use while remaining lightweight and travel worthy. This pole features an internally coiled cable and XLR connection at the base of the pole. A total of four aluminum sections telescope between 2' 5" to 7' 6" and will easily store in any standard equipment case. The captive-collet coupling system locks each section in place for even further reliability.
Internally coiled XLR cable and connection at the base
The KE-89CC features a bottom-mounted 3-pin XLR connection
Designed to fit in any standard equipment case, for ENG, EFP and DV location production work
Jam-resistant collar coupling
Unique pole top design with cable retention slots and replaceable stailess steel mounting stud